Date And Time; Configuration Of Setting Up And Printing; Instructions Manual - Sun BREEZE II Manual De Instrucciones

Select OPTIONS and the following screen is displayed:
Call the technical service for the code. Once you have entered the code, press ENTER:
Select the option required and press ENTER to switch from "on" to "off" and vice versa.
Press "STOP" to go back to the PREVIOUS MENU.

DATE AND TIME

The machine keeps date and time settings even if it is not used for around one year.
From the CONFIGURATION MENU:
Select DATE AND TIME and the following screen is displayed:
Press START to change date and time

CONFIGURATION OF SETTING UP AND PRINTING

The printout can be personalised by entering 4 lines containing the workshop's details (e.g.
Name, address, telephone n° and e-mail).
From the CONFIGURATION MENU:
Select CONF. SET & PRINT and the following screen is displayed:

INSTRUCTIONS MANUAL

LANGUAGE
UNIT OF MEASURE
OPTIONS
SET DATE & TIME
SET PRINT HEAD.
ENTER OPERATOR NR.
........
ENABLE TRACER on
PIPE FLUSHING on
TEST AZOTO on
LANGUAGE
UNIT OF MEASURE
OPTIONS
SET DATE & TIME
SET PRINT HEAD.
ENTER OPERATOR NR.
hh:mm:ss – gg/mm/aa
ENTER TO CONFIRM
START TO CHANGE
LANGUAGE
UNIT OF MEASURE
OPTIONS
SET DATE & TIME
SET PRINT HEAD.
ENTER OPERATOR NR.
-23-