Dimensions; Basic Lengths/Weights; Loading Data; Plm-Ii Loading Data - RK Rose+Krieger PLM-II Instrucciones De Montaje

6.3 Dimensions

Linear units are produced individually to length in accordance with your specification.
The width and height of this linear unit is determined from the choice of size and design and can
be taken from the Linear Components catalogue.

6.3.1 Basic lengths/weights

PLM-II
Design
PLM-II 20x20
PLM-II 40x20

6.4 Loading data

In dynamic operation, this must be considered for the design:

6.4.1 PLM-II loading data*

Design
PLM-II 20x20 125 N
PLM-II 40x20 125 N
* referred to guidance slides (values static, guidance unit covering the whole area)

6.4.2 PLM-GII loading data*

Design
PLM-G II 20x20 -
PLM-G II 40x20 -
* referred to guidance slides (values static, guidance unit covering the whole area)
Basic length in mm
121
141
Fx max = m * a [m/s2]
Permitted forces
Fx Fy +Fz
160 N 90 N
200 N 110 N
Permitted forces
Fx Fy +Fz
160 N 90 N
200 N 110 N
6. Product information
Weight in kg
basic length
0.15
0.27
Permitted torques
-Fz Mx My
180 N 3 Nm 10 Nm
220 N 4 Nm 14 Nm
Permitted torques
-Fz Mx My
180 N 3 Nm 10 Nm
220 N 4 Nm 14 Nm
Weight in kg
per 100 mm travel
0.06
0.10
Mz
10 Nm
14 Nm
Mz
10 Nm
14 Nm
35