Faber STRATUS NB Instrucciones De Instalación página 12

4
Connect the Hood body air
outlet with the Remote Blower
air outlet.
5
From Inside the Hood connect the
Cable to the Wiring BOX as shown
in the image to the right.
From Inside the Hood, remove the
Cover from the wiring box 2 by
removing two screws.
Break the correct hole in the Wiring
Box for passing the cables from the
remote blower.
Connect the cable from the Remote Blower with the
two wires inside the Wiring Box by twist-on type wire
connector and matching the color
Replace the field wiring compartment cover.
Check the Wiring Diagram.
A
B
C
D
E
12