Publicidad
Idiomas disponibles
Idiomas disponibles
1
Supplement for instruction manual
1
SRP-System (Speed responsive pressurefoot control)
.01
1
Knee switch
.02
1
Fig. 1
By means of a linear motor, the SRP-system makes it possible to adapt the
pressure on the presser foot to suit the respective sewing speed or the
workpiece. In addition the clearance under the presser foot can be adjusted
individually.
All adjustments are made by changing the parameters (See Chapters 1.03
and 1.04)
● By operating knee switch 1, the presser
foot can be raised when sewing is
interrupted.
GB
5
Publicidad
