Noises - AEG SCT81900S0 Manual De Instrucciones

20 www.aeg.com
Hb
Do a final check to make sure that:
• All screws are tightened.

8. NOISES

There are some sounds during normal
running (compressor, refrigerant circula-
tion).
8 mm
K
Ha
Hb
Hd
Remove the brackets and mark a distance
of 8 mm from the outer edge of the door
where the nail must be fitted (K).
Place the small square on the guide again
and fix it with the screws supplied.
Align the kitchen furniture door and the
appliance door by adjusting the part (Hb).
Press the part (Hd) on the part (Hb).
• The sealing strip is attached tightly to
the cabinet.
• The door opens and closes correctly.