Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MAIN COMPONENTS AND ACCESSORIES ( FIG 1 )
1.
Water filler hole cap
2.
Water tank
3.
Temperature selector
5.
Operation/temperature level LEDs
6.
Water cup
BEFORE STARTING TO IRON
cap Fig 1 (1) by turning it backwards (see arrow).
thus guarantee that your iron stays in perfect condition for as long as possible.
If you cannot find distilled water for any reason, be sure to use water that
is low in minerals (soft).
of preference:
° Distilled water
°
° Filtered water with low mineral content (counter top unit or store bought)
° Tap water (if your tap water is hard, this is the least recommended).
supplied Fig 1 (6), keeping the iron in the vertical position, resting on its end
Fig 1. When the tank is full, close the cap.
appliance generates a substantial flow of steam, otherwise you will need to
fill the water tank more often.
ironing temperature. We recommend that you classify the garments accord-
ing to their required ironing temperature and to begin with the garments that
ATTENTION: Ironing delicate garments with a temperature higher than necessary
is harmful for the fabric and causes burnt residue to get stuck to the soleplate.
05
Publicidad
Tabla de contenido
