Quick Start Instructions; Maintenance - Health O Meter 2595KL Instrucciones De Uso

QUICK START / USER INSTRUCTIONS
1. Press the ON/OFF button to turn the scale on.
2. Wait until "0.0" appears on the digital display.
3. Sit the patient on the scale. The display will blink "
4. If you wish to reweigh without asking the patient to get off and to sit on the scale again, press the
REWEIGH button.
5. Ask the patient to get off the scale. The digital display should continue to read the person's weight until
REWEIGH or ZERO button is pressed.
NOTE: After 2 minutes of inactivity, the scale will turn itself off to conserve power. To restart the scale,
press the ON/OFF button

MAINTENANCE

GENERAL
This section provides instructions for maintenance, cleaning, troubleshooting and operator replaceable
parts for the 2595KL Electronic Chair Scale. Maintenance operations other than those described in this
section should be performed by qualified service personnel.
MAINTENANCE
Before first use and after periods of non-use, check the scale for proper operation and function. If the
scale does not operate correctly, refer to qualified service personnel.
1. Check overall appearance of the total scale for any obvious damage, wear and tear.
2. Inspect the power adapter for cord cracking or fraying or for broken or bent prongs.
CLEANING
Proper care and cleaning is essential to ensure a long life of accurate and effective operation.
Disconnect the scale from the adapter power source.
1. Clean all external surfaces with a clean damp cloth or tissue. Mild soap and water solution may be
used. Dry with a clean soft cloth.
2. Do not immerse the chair scale or arm support into cleaning or other liquid solution.
3. Do not use Isopropyl Alcohol or other solutions to clean the display surface.
4. Do not use abrasive cleaners.
.
6
------
------ " until the weight of the person is determined.