Extraordinary Maintenance - Cattani Turbo-Smart A Manual De Instrucciones

Ocultar thumbs Ver también para Turbo-Smart A:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Extraordinary maintenance

Extraordinary maintenance must be entrusted to a trained
technician in possession of original spare parts:
- pay special attention to danger signals. Use goggles,
gloves and disposable overalls for personal protection;
- check that routine maintenance has been duly carried out
and make sure that Magnolia products are used;
- before any intervention carry out a series of washes with
Puli-Jet plus disinfectant, then wait 60 minutes for a com-
plete disinfectant action. For more safety, it is advisable
to disinfect the evening before the intervention;
• Every 12 months:
- check maximum detected temperatures and all alarms.
Intervene accordingly;
- check the aspirator noise level (max. 72 dB according to
the regulation 3047 (E);
- remove dust from the circuit AC 80 inside electronic
components using a blast of dry air not exceeding 2 bar
pressure. By means of a 6 bar blast of air clean also
the small holes on the frontal cover of the aspirating
unit (15);
- check the conditions of plastic hoses, in particular
the hoses under pressure connecting the centrifugal
separator and the Hydrocyclone ISO. We suggest to
replace these hoses every 12-18 months.
• Every 18-24 months:
- check the working conditions of the centrifugal separator
(11) and re-circulation valve (14).
• Every 10.000 working hours:
- every time a component containing a rubber part ("O" ring,
gasket or seal) is disassembled, replace the rubber part;
- replace the motors bearings;
- where routine maintenance is not carried out properly or
unsuitable products are used, train the staff and inform
the person in charge.
HOME
15
27
ALLARME:
TEMPERATURA ELEVATA
11
14
INDEX

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Turbo-smart b

Tabla de contenido