Time Configuration; Relay Configuration - Fermax EXTRA-500 Manual De Usuario

Cod. 97844 V06_17
To return to the previous menu, move to the ----- position and press the C key.
If no action is performed, the equipment exits the program automatically after a
period of 60 seconds and emits two short beeps.
Total reset
Move to any memory position and keep the C key pressed down for more than 5
seconds. The equipment will emit 10 warning beeps followed by others at a more rapid
frequency, indicating that the operation has been performed.
F.3 TIME CONFIGURATION
Allows the unit's date and time to be configured, enabling the correct management of
events.
Screen display
d_xx
M_xx
A_xx
h_xx
M_xx
If no action is performed, the equipment exits the program automatically after a
period of 60 seconds and emits two short beeps.
F.4 RELAY CONFIGURATION
Allows configuration of the relay activation timing, and in relay 4, allows configuration
of timing if it is to be used as an alarm.
Screen
display
r1
r2
r3
r4
To return to the previous menu, move to the ----- position and press the C key.
If no action is performed, the equipment exits the program automatically after a
period of 60 seconds and emits two short beeps.
Configuration
day
month
year
time
minutes
Bi-stable Impulse configuration
configuration (biES) (Im__)
Yes
Yes
Yes
Yes
10
Values (xx)
01 - 31
01 - 12
00 - 99
00 - 23
01 - 60
Alarm configuration
(Al__)
01 – 30 seconds
01 – 30 seconds
01 – 30 seconds
01 – 30 seconds
No
No
No
01 – 15 minutes
1247085/1.0