HQ-Power VDPL1801MHW10 Manual Del Usuario página 5

6. Operation
a. Stand-alone Mode
• The LED fixture can be used as a stand-alone unit. The stand-alone functions AUTO 1, AUTO 2, SOUND 1,
SOUND 2 and CUSTOM 1 can be activated without connecting any controller to the unit.
• Simply go to the RUN menu from the display and select the target program to activate.
b. Master/Slave Mode
• When two or more units are connected in series using DMX512 cables, the units can work in master/slave mode.
• Set the first unit in the series to one of the
stand-alone modes as described above, and all
other units have in SLAVE mode (from the RUN
menu).
c. DMX Mode
Channel
1
2
3
4
5
6
7 RGB macros - speed
8
9
10
d. DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDPL1801MHW10. Multiple VDP1801MHW10s can be linked through serial linking. The linking
cable should be a two-core screened cable with XLR input and output connectors.
VDPL1801MHW10
Description
Pan
Tilt
Pan / tilt speed
Red
Green
Blue
Dimmer
Strobe function
Control mode
From To Function
0 255 From 0 to 540°
0 255 From 0 to 270°
0 255 From slow to fast
0 255 From 0 to 100%
0 255 From 0 to 100%
0 255 From 0 to 100%
0 5 No function
6 35 Red 100% / green UP / blue 0%
36 65 Red DOWN / green 100% / blue 0%
66 95 Red 0% / green 100% / blue UP
96 125 Red 0% / green DOWN / blue 100%
126 155 Red DOWN / green 0% / blue 100%
156 185 Red 100% / green 0% / blue DOWN
186 215 Red 100% / green UP / blue UP
216 240 Red UP / green down / blue 100%
241 250 Auto-macro
250 255 White
0 255 From 0 to 100%
0 255 From 0 to 24 Hz
0 45 Normal operation
46 55 RESET (after 3 sec)
56 95 Auto 1 (after 3 sec)
96 135 Auto 2 (after 3 sec)
136 175 Sound 1 (after 3 sec)
176 215 Sound 2 (after 3 sec)
216 255 Custom (after 3 sec)
5 HQPOWER