Troubleshooting - Harman AKG MICROLITE Serie Manual De Uso

TROuBLESHOOTINg

11
Problem
No sound
100
Troubleshooting
Possible cause
Power to mixing
console and/or
amplifier is off
Channel fader or
master level controller
on the mixing console
or volume control on
amplifier is at zero
Microphone is not
connected to mixing
console or amplifier
Cable connector not
plugged in correctly
The cable is defective
No supply voltage
Remedy
Switch on power to mixing console
or amplifier
Set channel fader or master level
controller on mixing console or
volume control on amplifier to
desired level
Connect microphone to mixing
console or amplifier
Plug in cable connector again
Check the cable and replace if
necessary
Switch on phantom power.
Check the cable and replace if
necessary
MICROLITE MANUAL