Attaching The Headworn Microphone - Harman AKG MICROLITE Serie Manual De Uso

HEAdWORN MICROPHONES
6.3
Attaching the
headworn
microphone
82

Attaching the headworn microphone

Remove the microphone from the
1
case and place the protective cap
on the microphone capsule.
When attaching the LC81, make
sure the protective cap covers the
sound entry holes completely!
Place the wind screen on the protec‑
2
tive cap if necessary.
3
Adjust the position of the micropho‑
4
ne by grasping the loop and pulling
the ear clip wire the same distance
out of the headset on both sides.
Place the microphone on your head
5
from behind, positioning the flexible
ear clips over your ears so that the
each of the amplifiers are behind
your earlobe.
If the microphone is too loose,
6
remove the microphone again
and carefully bend the wire frame
inwards.
Fold the ear clip
upwards in a vertical
direction depending
on whether you want
to wear the micro‑
phone on the left or
the right.
MICROLITE MANUAL