Taurus HADES Manual De Instrucciones página 19

Once you have finished using the appliance:
- Turn the appliance off using the on/off switch.
- Clean the appliance
Cleaning:
- Disconnect the charger from the mains and allow it to cool before
undertaking any cleaning task.
- Dismantle the appliance following these steps:
- Take off the position comb (fig 2).
- Hold the main body, place your thumb against the blades and then
push them away from the main body (fig 3).
- Use the cleaning brush (I) to remove the hair from inside the
appliance and the blades. (fig 4)
- Take the blade back in place after cleaning. (fig 4)
- Clean the equipment with a damp cloth with a few drops of
washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base pH such as
bleach, or abrasive products, for cleaning the appliance
- Never submerge the appliance in water or any other liquid or place
it under running water.
- During the cleaning process, take special care with the blades, as
they are very sharp.
- If the appliance is not in good condition of cleanliness, its surface
may degrade and inexorably affect the duration of the appliance's
useful life and could become unsafe to us.
- Clean the blades and the comb guide with the cleaning brush. Re-
move the hairs from the blades and from inside the appliance with the
brush. It is important to clean off remaining hairs after each use.
- The blades can be washed under the tap. Make sure that the blade
is completely dry before put it again on bear trimmer.
Anomalies and repair:
- Take the appliance to an authorized technical support service
if product is damaged or other problems arise- Do not attempt
to disassemble or repair the appliance yourself as this may be