Introduction; Safety - Skymsen PSA-15HD Manual De Instrucciones

1. Introduction

1.1

When not properly used the Meat Grinder Model PSEE-98MHD can be

potentially DANGEROUS. Servicing, cleaning or any other operation shall be made by

trained people.

The following instructions must be observed in order to avoid accidents:

1.1.1 Always unplug the machine when cleaning, servicing or when any other operation

is needed.

1.1.2 Never use tools that do not belong to the machine during operation.

1.1.3 Before switching the machine on check if the Head Nº01 (Pic.01) is firm in its

position, if all its internal components are assembled as well as if the Pan Nº04 (Pic.01)

is mounted.

1.1.4 Never spray water or other liquid substances directly at motor, power switch or

any other electrical components.

1.1.5 Never use loosen clothes specially shirts with loosen sleeves during operation.

1.1.6 Never put your fingers or any other object but the Stomper Nº05 (Pic.01) inside

feeding throat.

1.1.7 Keep hands off turning parts.

1.1.8 Never switch the machine on with wet clothes or wet shoes.

1.1.9 Before using the machine make use it is properly grounded.

Your equipment is also protected against any eventual failure. Operator and

motor's integrity is maintained under this adverse condition. This protection is possible

by means of a thermal overload switch. In case your equipment suddenly stops wait

for a few minutes and press thermal overload switch button located at rear of machine.

This protection is possible by means of a thermal overload switch. In case your

equipment suddenly stops wait for a few minutes and press thermal overload switch

button located at rear of machine.

This equipment shall not be used by persons (including children) having reduced

mental or physical capabilities, or having faulty experience or knowledge, unless

they have been previously supervised or instructed by a person responsible for

the equipment safety, about how to use it.

IMPORTANT

Tabla de Contenido

Psa-25hd