- Do not crease the appliance by
placing items on top of it during
storage.
- Examine the appliance fre-
quently for signs of wear or
damage. If there are such
signs, if the appliance has been
misused or does not work, take
the appliance to an authorised
technical support service before
switching it on again.
- If the connection is damaged
it must be replaced. Take the
appliance to an authorised
Technical Assistance Service.
Do not try to dismantle or repair
without assistance, as this may
be dangerous.
- Ensure that the voltage indicated on the
nameplate matches the mains voltage before
plugging in the appliance.
- The appliance's plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
- Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
- If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not use the appliance near bathtubs,
showers or swimming pools.
- Never use the electric wire to lift up, carry or
unplug the appliance.
- Ensure that the electric cable does not get
trapped or tangled.
- Do not allow the connection cable to come into
contact with the appliance's hot surfaces.
- Check the condition of the electrical connection
cable. Damaged or tangled cables increase the
risk of electric shock.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if the on/off switch
does not work.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
INSTRUCTIONS FOR USE
USE:
- This appliance has been designed exclusively
for heating specific areas of the body. Do not
use it for any other purpose.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
(Fig. 1)
- Press the temperature selector button (Fig. 2,
button F). It will start at level 0 (no heating).
Continue to press the button to increase the
temperature up to 9, the maximum level.
- Press the time selector button (Fig. 2, button G).
It will start at level 1. Continue to press the but-
ton to increase the time programmed by 1 hour
each time up to a maximum of 9 hours, if you
press it again after 9 the H symbol will appear
which establishes a duration of 12 hours.
- For continuous use never exceed Temperature
level 4.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance to the mains.
CLEANING
- Disconnect the appliance from the mains and let
it cool before undertaking any cleaning task.
- Clean the appliance's control with a damp cloth
with a few drops of detergent on it and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- The blanket may be washed by hand or
machine-washed at a temperature of up to 40º.
Remove the control before washing. The control