General Safety Instructions - LaserLiner DistanceMaster Compact Pro Manual De Instrucciones

Ocultar thumbs Ver también para DistanceMaster Compact Pro:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39

General safety instructions

– Attention: Do not look into the direct or reflected beam.
– The laser may not get into the hands of children!
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Do not expose the device to mechanical stress, extreme temperatures,
moisture or significant vibration.
– The device must only be used in accordance with its intended purpose
and within the scope of the specifications. Modifications or changes to
the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
– The measuring device is equipped with a wireless interface. Local
operating restrictions, e.g. in hospitals or aircraft may apply.
Switch on, measure and switch off:
device on
1x
Change unit of measure:
m / ft / inch / _' _"
3 sec
Change measurement point (reference):
rear (device on)
12
GB
Do not stare into the beam!
laser on
2x
1 sec
1x
1 sec
Laser radiation!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014
measure
3x
Delete the last
measured value:
front
1x
device off
3 sec
1x

Publicidad

Tabla de contenido
loading

Tabla de contenido