Data Transfer; Application (App) - LaserLiner DistanceMaster Compact Pro Manual De Instrucciones

Data transfer

The laser distance meter features a Bluetooth
wireless data transfer to mobile devices with a Bluetooth
(e.g. smartphone, tablet).
The system prerequisites for a Bluetooth
at www.laserliner.com
The device can set up a Bluetooth
compatible devices.
The range is set to a maximum distance of 10 m from the terminal
device and greatly depends on the ambient conditions such as the
thickness and composition of walls, sources of interference as well
as the transmit / receive properties of the terminal device.
* The Bluetooth word mark and the logo are registered trademarks of Bluetooth SIG Inc.
®
Enable / disable Bluetooth
Bluetooth
When enabled the Bluetooth
the function is active, a mobile device can connect by means of an app
to the measuring device.
* The Bluetooth word mark and the logo are registered trademarks of Bluetooth SIG Inc.
®

Application (app)

An app is required to use the Bluetooth
the app from the corresponding stores for the specific type of terminal
device:
!
Make sure that the Bluetooth
is activated.
After starting the app and activating the Bluetooth
tion can be set up between a mobile device and the laser distance meter.
If the app detects several active measuring devices, select the matching
device.
This measuring device can be connected automatically the next time it is
switched on.
* The Bluetooth word mark and the logo are registered trademarks of Bluetooth SIG Inc.
®
DistanceMaster Compact Pro
®*
symbol appears on the display (e). When
®*
function that enables
®*
connection are specified
®*
connection with Bluetooth 4.0
®*
:
® *
enable
1 sec
1x
function. You can download
®*
interface of the mobile device
®*
interface
®*
disable
1 sec
2x
function, a connec-
®*
GB
15