LaserLiner ThermoMaster Manual De Instrucciones página 9

6
Measured value resolution (0.1 °C/1.0 °C)
This function changes the measurement resolution is changed between 0.1 °C and 1.0 °C. The resolution
of 0.1 °C is particularly useful for measurements ≤100 °C where it is necessary to determine the tempera-
ture exactly. A resolution of 1.0 °C is recommended for measuring higher temperatures.
! The device should be checked regularly to ensure it is functioning correctly. Calibration intervals of
1 year are recommended.
Technical data
Measuring range, measuring system
Accuracy, measuring system
-50 °C ... 0 °C
0 °C ... 1000 °C
1000 °C ... 1300 °C
Resolution
Unit of measurement
Measuring range, thermocouple
ThermoProbe K
ThermoSensor Air
ThermoSensor Tip
Accuracy, thermocouple
ThermoProbe K
ThermoSensor Air
ThermoSensor Tip
Sensor (EN 60584-2)
Display
Power supply
Operating temperature
Storage temperature
Dimensions
Weight (without battery)
EU directives and disposal
This device complies with all necessary standards for the free movement of goods within the EU.
This product is an electric device and must be collected separately for disposal according to the European
Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: www.laserliner.com/info
ThermoMaster
Subject to technical alterations 03.11.
-50 °C ... 1300 °C
±2 °C
±(0.5 % of displayed value +1 °C)
±(0.8 % of displayed value +1 °C)
0.1 °C/1 °C selectable
°C/°F selectable
-50 °C ... 800 °C
-50 °C ... 800 °C
-50 °C ... 800 °C
±2.5 K (-50 °C ... 200 °C)
±2.5 K (-50 °C ... 333 °C)
0.75 % (333 °C ... 800 °C)
±2.5 K (-50 °C ... 333 °C)
±0.75 % (333 °C ... 1200 °C)
Replaceable sensor, type K
LC display, 3.5 segments, (max. 1999)
1x 9 V alkaline battery (NEDA 1604, IEC 6F22)
0 °C ... 50 °C
-20 °C ... 60 °C, 10 % ... 70 % rH (non-condensating)
162 mm x 76 mm x 38.5 mm
0.21 kg
GB 09 09