Safety Information - LaserLiner ThermoMaster Manual De Instrucciones

!
Read the operating instructions and the enclosed brochure „Guarantee and additional notices"
completely. Follow the instructions they contain. Safely keep these documents for future reference.
Function/Application
The digital thermometer is used to measure temperature and temperature differences with the aid of ex-
changeable type K thermcouples/sensors. The digital thermometer is predominantly used for temperature
measurement in laboratories and in industrial applications. With the aid of the MAX function it is possible
to determine limit temperature infringements in extended series of measurements. The 1/4" tripod con-
nection provides a fl exible locking facility for stationary setups.

Safety information

– Only hold the test prods by the handles. Do not touch the test prods, they can become very hot during
the measuring procedure.
– Wherever possible the test prods should not be operated with an external voltage supply; if this is
unavoidable pay particular attention to the maximum voltage with respect to earth potential and the
maximum voltage between the two inputs T1 and T2. To avoid damaging the device, the external vol-
tage supply must not be higher than 24 V AC or 60 V DC. Please note that the test prods are electrically
conductive and may irreparably damage the test piece when measuring in connection with an external
voltage supply.
– Use under high voltages or under high electromagnetic alternating fi elds can have an infl uence on the
measuring accuracy.
– The device must only be used in accordance with its intended purpose and within the scope of the
specifi cations.
– If you are working with voltages higher than 24 V AC/60 V DC, exercise extreme caution. Touching the
electrical conductors at such voltages poses a risk of life-threatening electric shocks.
– If the device comes into contact with moisture or other conductive residue, work must not be carried
out under voltage. When using the device outdoors, make sure that the weather conditions are appro-
priate and/or that suitable protection measures are taken.
– The measuring tools and accessories are not toys. Keep out of reach of children.
Symbols
Warning about hazardous electrical voltage: Unprotected live components inside the device
housing are capable of posing a risk of electric shock.
Danger area warning
Protection class II: The test device has reinforced or double insulation.
Earth potential
!
Important notes. Must be observed.
06 GB