Carrier RG56N Serie Manual Del Propietário página 6

HOW TO USE ADVANCED FUNCTIONS
Press this button 2 times under HEAT Mode and 17 C
2
The unit will operate
at high fan speed (while
F.P.
compressor on) with
temperature automatically
set to 8 C.
Note:This function for heat pump air conditioner.
Press this button 2 times under HEAT Mode and 17 C to activate the freeze protection function. It will
help to keep the room above 0 C (freezing point) in severe cold winter.
Press On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel this function.
Press together Direct button and Swing button at the same time more than 2 seconds to activate Lock Mode 1 function.
2s
2s
Lock
Mode
1
Enter lock mode 1 by pressing Direct and Swing button at the same time more than 2 seconds. At lock mode 1, all
buttons will not response except press these two buttons again to disable locking.
Press together TIMER ON button and TIMER OFF button at the same time more than 2 seconds to activate lock mode 2 function.
2s 2s
Lock
Mode
2
Enter lock mode 2 by pressing TIMER ON and TIMER OFF button at the same time more than 2 seconds. At lock
mode 2, all buttons will not response except press ON/OFF, TEMP UP and DOWN buttons or press these
two buttons again to disable locking.
Press together Mode button and Fan button at the same time more than 2 seconds.
2s
2s
Fan
Mode
Cool
Only
Disable the HEAT mode by pressing Mode and Fan buttons at the same time more than 2 seconds.
Recover the HEAT mode by pressing Mode and Fan buttons at the same time more than 2 seconds again.
09
SET TEMP.
Lock symbol displays
SET TEMP.
Lock symbol displays
10