Before Using For The First Time; Operation - Toasting; Operation - Reheating - Unold 38905 Instrucciones De Uso

before uSing for the firSt tiMe

1. Remove all packaging materials and trans-
port locks, if applicable.
2. Check whether all listed accessory parts are
present.
3. Clean the toaster with a damp cloth as
described in the chapter „Cleaning and
care" on page 16.
4. Wipe the folding griddle with a damp cloth
and dry it carefully.
5. Check whether all parts are properly assem-
bled and the appliance is stable.
6. Make sure that there is sufficient clearance
to walls and other appliances, because the
toaster becomes hot during operation.
7. Connect the appliance to the mains net-
work (220-240 V~, 50 Hz) using the supply
cable.
8. Before toasting for the first time, one toas-
ting cycle must be performed without bread.
For this purpose, press the toast lever down
until it locks in place.
9. When the toasting process is complete the
toast lever automatically pops up. Now you
can begin toasting bread.
10. Similarly, the griddle should be heated up
once before its initial use.

operation - toaSting

1. Prepare the toaster as described under
„Before using for the first time".
2. Insert the bread slices into the slots of the
toasting chamber.
3. Set the desired toast darkness with the
darkness control. For golden brown toast set
the lever in the middle position.Press the
toast lever down until it locks in place.
4. The toasting process begins.
5. You can interrupt the toasting process at any
time by pressing the „Stop" button.

operation - reheating

With the reheat function you can reheat bread or buns without toasting them.
1. Insert the bread slices into the slots of the
toasting chamber.
2. If you would like to warm up buns, place the
bun attachment on the toaster and place the
buns on top.
3. Press the toast lever down until it locks in
place.
11. Fold out the griddle.
12. Switch the ON/OFF switch to „ON". The
preheating begins.
13. Heat up the appliance for a few minutes
without food in order to remove any residue
from the manufacturing process. Open the
window during this burn-in phase.
14. Any already existing signs of use can be
seen on the griddle after the burn-in, how-
ever they do not inhibit the function of the
appliance and are not grounds for comp-
laint.
15. Before using the griddle for the first time,
lightly grease it with a brush with a heat-
resistant shortening, such as margarine
(since the griddle of the appliance is coa-
ted, you need only grease it before the initial
use).
16. If a mild odour becomes perceptible after
heating up your new appliance for the first
time, it is completely harmless.
17. Please observe that the griddle can become
very hot during the heating process - risk
of burns!
6. Once your desired toasting level is reached,
the bread is automatically ejected. The
appliance switches off.
7. In order to make removal of the toasted
bread slices easier, the toaster has a lift
function. For this purpose, push the toast
lever up slightly when you want to remove
the toast.
8. Pull out the mains plug when you are fini-
shed preparing the toast.
4. Then press the „Reheat" button.
5. Toast and buns are reheated, but not toas-
ted.
6. You can interrupt the reheating process at
any time by pressing the „Stop" button.
15