Inserting Batteries - LaserLiner EasyCross-Laser Manual De Instrucciones

Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with
the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
!
When transporting always switch off all lasers, secure
pendulum and push the slide switch (3) to the right.
1

Inserting batteries

Open the battery compartment
and insert batteries (3 x typ AAA)
according to the symbols.
Be sure to pay attention to
polarity.
4
Horizontal and vertical levelling
2
Release the transport restraint, push the slide
switch (3) to the left. The laser lines can be switched
individually with the selection button.
EasyCross-Laser
–
+
–
1 LED levelling
1
LED flashing: levelling off
LED on: levelling on /
ON/OFF button
2
Battery compartment
2
(backside)
3 Slide switch
a ON
b
b OFF / transport lock /
3
slope mode
a
4 Laser output windows
5
1/4" tripod threads (bottom)
5
–
EN
07