Tabla de contenido

Publicidad

1
2
1
30
Basic Operation
Adjusting the Volume/
Bass/Treble/Balance/
Fader
1 2
Press the rotary encoder repeatedly until the
mode you wish to adjust is obtained. Each
press changes the modes as follows:
→ BAS. → TRE. → BAL. → FAD. → VOL.
The volume level can be adjusted at any time
by just rotating the rotary encoder.
Rotate the rotary encoder to set to the desired
sound within 5 seconds after selecting the
mode.
Note: If the rotary encoder is not turned or
1

Muting the Sound

Press the MUTE button to switch between the
Mute On and Off modes.
When the MUTE On mode is selected, the
volume level instantly decreases.
pressed within 5 seconds after selecting
the BAS. (Bass), TRE. (Treble), BAL.
(Balance), or FAD. (Fader), the unit
automatically defaults back to the VOL.
(Volume) mode.
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cva-1005r

Tabla de contenido