Loft Monitor; Buttons - Fermax VIDEO CITYLINE DUOX 1L Manual De Instalador

DUO DUO DUO DUO DUOX CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
DUO DUO X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
DUO DUOX CITYLINE KIT 1-2L DUO X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L

LOFT MONITOR

The monitor supplied in the kit comes PRE-PROGRAMMED from the factory!
Notice: If for whatever reason you need to reprogram the monitor, see chapter
"Programming the Monitor."

Buttons

Lock Releases / Call Guard Unit Button.
· While in conversation with the Street Panel (only video or audio+video), pressing it will
activate the open door lock-release.
· When you press this button with the telephone hung-up (standby), a call will be made to the
guard unit (where one exists).
Auto-start button.
Select the Block's or General Entrance's camera (depending on availability in the
installation, see Operations chapter: Auto-start).
F1 Button
F1
Auxiliary function (negative output "-" / sending command
Auxiliary F1 function.
The F1 button and F1 terminal have the option of being configured. You can select between
Sending a negative (output) or Panic call to the Guard Unit (input).
It is initially configured, by default, as an output and sends a negative "-".
If Panic Day Mode is configured in the Guard Unit, Panic Call mode is automatically
configured in the monitors. Upon deactivating this mode in the guard unit, it also
deactivates the monitors.
When you press the F1 button you send a Panic command via the bus. Besides, the
F1 terminal acts as an input so that when you connect a button to it, when pressing
it you send a panic command to the guard unit.
Button Menu: Adjustments and configuration.
MENU
· To access the:
- Administrator menu when the monitor is not programmed. From this menu, you
can program the monitor according to your installation needs
- User Menu (once the monitor is programmed). From this menu, you can access
the user's settings to personalise them.
F1
F1
MENU
MENU
Page 13