Warning; Safety Information - VWR 444-1372 Manual De Instrucciones

Thank you for buying this appliance. You have acquired a product that was manufactured and tested in
accordance with DIN EN ISO 61010.
We are confident it will enable you to carry out your work easily and to your complete satisfaction.

Warning

Unpack the appliance and parts with care. Compare the contents with the packing list. Check for damage and
report any defects or deviations from the packing list to the supplier without delay.
Read the operating instructions carefully and in full and ensure that everyone who operates the appliance has
read the instructions carefully before use.
Keep the operating instructions in a place which is accessible to everyone.
This appliance comes fitted with a Euro plug (DIN 49441 CEE 7/VII 10/16 A 250 V).
In Great Britain and Switzerland, this product is sold with the locally approved standard plug. In Great Britain
with a BS1363 13 Amps 3-prong plug, in Switzerland with a SEV type 12 plug, approved by SEV1011.
If the appliance is to be connected up to a different grid, an approved adapter must be used or the plug
supplied replaced by a qualified electrician with a 3-pin plug approved for the grid in question.
The appliance is earthed upon delivery. If the original plug is replaced, make sure the appliance's protective
conductor is connected to the new plug.

Safety Information

Avoiding of Accidents and Damage to the Instrument
Please follow the guidelines below, and read this manual in its entirety to ensure safe operation of the unit.
VWR recommends against the use of:
Avoiding of Accidents
Observe all safety and accident prevention regulations in the laboratory!
Wear safety goggles and suitable working clothes when working with the shaker.
Extreme care is called for when handling toxic or other hazardous substances.
Avoiding Damage to the Instrument
Observe all safety and accident prevention regulations in the laboratory!
VWR Collection Manual ver 1, rel 5 30.04.2015
EN
16