Charcoal Filter Placement (Recirculating Accessories); Non-Return Valve Installation (Recirculating Accessories) - ELICA Arietta DKI001MX 36 Guía De Instalación Y Del Usuario

Charcoal filter placement (Recirculating accessories)

Fit the charcoal filter mattress on the upper side of each grease filter.
Use provided springs to fix it in place.
Note:
when removing for replacing for a new one do not remove Fixing Springs, simply pull out one rotating
outwards.

Non-return valve installation (Recirculating accessories)

•
Insert end "a" of the rod into the "plastic transition tube", pushing outwards until it crosses the material (plastic
transition tube) with a little force.
•
Place end "b" of the rod into the "plastic transition tube". Push outwards until it crosses the material (plastic transition
tube) with a little force, the rod must be symetrically from both sides.
•
With the pliers bend both ends of the rod, towards the "plastic transition tube".
�
�
�
�
������
�������

�
�
�
�