Frame Function - Brother P-Touch 2600 Guía De Usuario

2
While still holding down
5
until ON1 is displayed.
c
3
Release
With the Frame function, you can choose from various frames and highlights to design a more
decorative or emphasized label.
The default setting is OFF; however, 18 other settings are also available. Refer to Reference at
the end of this section for samples of the available settings.
When any setting other than OFF is selected, the Udl/Frm indicator on the right side of the dis-
play comes on.
To change the frame setting:
1 While holding down c, press 6 once, and keep c held down to display the cur-
rent frame setting.
2 While still holding down c, continue pressing 6 until the desired frame setting is dis-
played.

The Udl/Frm indicator comes on when any setting other than OFF is selected.
3 Release c to apply the selected frame setting to the text.
EXAMPLE
To select the candy frame setting:
1
While holding down
c
keep
c
, continue pressing
.

FRAME FUNCTION

c
, press
held down.
6
once, and
U N D L
O N 1
F R A M E
O F F
89