Factory Reset; Software Update; Privacy Policy - Lenco DIR-140 Manual Del Usuario

6.6

Factory reset

A factory reset resets al user settings to default values, so time/date, network configuration and
presets are lost. However, the radio's current software version is maintained.
To perform a factory reset, select Menu > System settings > Factory reset Proceed > Yes.
6.7

Software update

From time to time, upgrades will come available with bug fixes and/or additional features. You can
either check manually, or set radio to check automatically (this is default). If the radio detects that a
new software is available, it will ask you to install the update. If you agree, the new software will be
downloaded and installed. All user settings are maintained during a software update.
CAUTION: Before starting a software upgrade, ensure that the radio is plugged into a stable mains
power connection. Disconnecting power during software update may permanently damage the
unit.
6.8 Setup wizard
This allows you to run the Setup wizard at any time. The wizard guides you through the essential
settings in the following order:
1. Date/Time – Set format
2. Auto update- select clock update source or No Update
3. Set Time/Date (this step is only needed if the 'No Update' option is selected in Auto update)
4. Network wizard automatically runs (see section 5.3.1 Network)
Once you are connected to a network the wizard is completed.
6.9 Info
Shows details of the current system including:

SW version: software version number

Radio ID: Unique code used to identify this particular radio device

Friendly name: name by which the radio is identified on a network

6.10 Privacy Policy

Displays a privacy notice guiding you to our website for full details of the Frontier Smart
Technologies Privacy policy:
Please visit the following page on a PC or mobile device.
www.Frontiersmart.com/privacy
16