Lenco DIR-260 Manual Del Usuario página 22

Method 2: Press the Scan button on the remote control to search automatically;
Method 3: Press and hold the or button on the unit and remote control to search
up and down; when a station searched, it will stop and play.
Station storing or preset:
When a station searched (eg. 92.00MHz), press and hold the Preset button on the unit or
press and hold the Preset button on the remote control, the following page will appear.
Turn the NAVIGATE knob on the unit or press the or button on the remote control to
select the preset/storing position, press the NAVIGATE knob or press the OK button to
confirm storing/preset.
Repeat the above steps to store/preset up to 10 stations.
Station recall:
After preset completed, press the Preset button to recall the stored station, press the OK
knob or the OK button to listen to the selected station.
FM menu.:
If scan setting is selected, the following page will appear, turn the NAVIGATE knob on the
unit or press the navigate button on remote control to set to YES or NO.
If Audio setting is selected, the following page will appear, turn the NAVIGATE knob on the
unit or press the navigate button on remote control to set to YES or NO.
22