Lenco DIR-260 Manual Del Usuario página 23

NOTE: If the reception is weak, please extend the telescopic antenna, or relocate the unit to
get better reception.
Aux in mode:
Aux in mode plays audio from an external source such as an MP3 player.
To play audio with Aux in mode
1. To avoid sudden loud volume, turn the volume low on both radio and, if adjustable, the
audio source device.
2. Connect the external audio source to the Aux in 3.5mm stereo socket.
3. To enter Aux in mode, either press Mode to cycle through the listening modes until Aux
in is displayed, or select Menu > Main menu > Aux in.
4. Adjust the volume of the DIR-260 radio (and, if necessary, the audio source device) as
required.
During playing, use the control on your external device.
23