Yakima Axe Shovel Bracket Manual De Instrucciones página 3

Place shovel or axe into brackets.
Axe head mounts to the
rear, blade up.
Note: Shovel or axe must not exceed 8 pounds.
Insert long screw from
back and secure with
black knob.
WHEN NOT IN USE, TIGHTEN KNOB COMPLETELY.
ATTACHMENT HARDWARE CAN LOOSEN OVER
TIME. CHECK AND TIGHTEN IF NECESSARY,
BEFORE EACH USE.
Be sure all hardware is secured
according to instructions. Failure to
perform safety checks before driving
away can result in property damage,
personal injury, or death.
KEEP THESE INSTRUCTIONS!
1033041B-3/9
Shovel must clear crossbar and
curve away from you.
If there is not enough tension to hold the handle securely
with knob fully tightened, reinsert the front plate into the
back slot.
READ THESE WARNINGS!
Do not use for anything
but shovels and single
bladed axes.
NOT RECOMMENDED
FOR CARRYING
THROUGH AUTOMATIC
CAR WASHES
IF YOU NEED FURTHER
TECHNICAL ASSISTANCE OR
REPLACEMENT PARTS:
Please contact your dealer
or call us at
(888) 925-4621
Monday through Friday,
7:00am to 5:00pm
Pacific time.
This product is covered
by YAKIMA's
"Love It Till You Leave It"
Limited Lifetime Warranty
To obtain a copy of this
warranty, go online to
www.yakima.com
or email us at
yakwarranty@yakima.com
or call (888) 925-4621