Cleaning Modes - cecotec Conga 1590 Active Manual De Instrucciones

and down direction buttons
and use and
decreased by whole hours, the minutes by 30 minutes.
2. Confirmation or cancellation of schedule
• After setting, aim the remote control at the robot and press
confirm the settings have been saved and the scheduled day will light up steady.
• Press the
day will turn off on the display and the next day will flash.
• Follow the before steps to schedule the desire day again. Once the complete
schedule has been saved successfully, it will exit the schedule mode.
3. Cancel schedule settings
• From the schedule settings, the scheduled day will light up and the non-scheduled
ones will flash. Press
• Then, press
• Once the schedule has been cancelled, press
4. Check schedule
• From the Standby mode or while the robot is on, press
scheduled days will be lit up steady except for the scheduled day closer to the
current day, which will flash.
• Press and
• Press on the remote control to quit the schedule-checking interface manually.
Note: after 10 seconds of no remote-control operation, the display will automatically show the
current time without need of using the remote control.
Recommendation: see the videotutorial at our YouTube channel for reference.

CLEANING MODES

The robot offers different cleaning modes which adapt to different cleaning needs.
1. Auto cleaning mode: From the standby mode, press
on the robot or the remote controlfor the robot to start
cleaning automatically. It will carry out a cleaning cycle in
Gyro mode, Edge mode and then will finish off in Random
mode. It is the most commonly used cleaning mode and
it is used to clean the 100 % of the house's surface. The
robot vacuums the floor's dust automatically, in and
organized and efficient way, as it features memory and gyroscopic navigation. Moreover,
it changes direction when it finds obstacles throughout its route and it returns to the
charging base in a smart and direct way once the cleaning is over. It includes TotalClean
function, therefore the robot cleans the whole surface, returning to the charging base
and
to switch between hours and digits. The hours can be increased or
button to cancel the schedule of the selected day. The prescheduled
and to select from Monday to Sunday.
to cancel the selected day. The display will show the next day.
to check the scheduled days.
to increase or decrease the hour and minutes
to exit the schedule mode.
check the schedule. The
ENGLISH
. A beep sound will
31