Cleaning Sensors And Wheels - cecotec Conga 1590 Active Manual De Instrucciones

ENGLISH
Remove the dust tank
from the Wet&dry tank.
Empty the dust tank.

CLEANING SENSORS AND WHEELS

• Use a soft damp cloth to clean wheels and sensors.
CLEANING CHARGING TERMINALS
• Use a soft damp cloth to clean the charging terminals on the
robot and on the charging base.
• Use a dry cloth to wipe the charging bones if the connection is poor.
34
Open the dust tank cover.
Wash the dust tank and
the primary filter using
water. Clean the High-
efficiency filter with a
brush, avoid washing it
under water.
Take the primary and
High-efficiency filter out.
Install the primary filter
and the High-efficiency
filter into dust tank.