Assembly - cecotec Conga 1590 Active Manual De Instrucciones

ENGLISH
with the appliance. Close supervision is necessary when
the appliance is being used by or near children.

3. ASSEMBLY

3
Wet&dry and dust tank installation
4. Open the water-filling opening, fill
the tank with water and close it again
following the arrows on the picture.
5. Completely dry the connecting plates.
6. Introduce the dust tank into the compartment and lower the handle.
7. Introduce the Wet&dry tank (water and dust) into the product's main body.
26
2
Main brush and mops installation
1. Install the main brush into the robot's main
1
body.
2. Install the main brush cover.
3. Adjust the mop to the tank's bottom part
and press with your hand to make sure it is well
attached.
6
5
7
4