Before First Use; How To Activate Xtradry; Timemanager; How To Activate Timemanager - Electrolux ESF5533LOW Manual De Instrucciones

Ocultar thumbs Ver también para ESF5533LOW:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

and the display is blank.
2. Press Start.
• The indicators
and
• The indicator
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1 XtraDry
Activate this option to boost the drying
performance. With XtraDry on, the
duration of some programmes, water
consumption and the last rinse
temperature can be affected.
XtraDry is a permanent option for all
programmes other than
need not to be selected at every cycle.
In the other programmes the setting of
XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Every time
activated, XtraDry is off and
needs to be chosen
manually.

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
,
and start flashing
,
are off.
still flashes.
and
is
• The display shows the current
setting:
= AirDry activated.
3. Press Start to change the setting:
= AirDry deactivated.
4. Press on/off to confirm the setting.
Activating XtraDry deactivates
TimeManager and vice versa.

How to activate XtraDry

Press Options until the indicator
comes on.
If the option is not applicable to the
program, the related indicator does not
come on or it flashes quickly for a few
seconds and then goes off.
The display shows the updated program
duration.

7.2 TimeManager

This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
The washing results are the same as
with the normal programme duration. The
drying results can decrease.

How to activate TimeManager

Press Options until the indicator
comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a few
seconds and then goes off.
The display shows the updated
programme duration.
ENGLISH
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Esf5533lox

Tabla de contenido