Whirlpool 8MWTW2024 Manual Del Usario página 8

11 Manual selection of the washing stages
This option allows you to select a manual cycle (one or more
stages of the selected automatic cycle) or even add a Soak to the
selected cycle.
HOW TO ADD SOAK TO AN AUTOMATIC CYCLE
- Turn the knob to the automatic cycle that you want to select.
- Push the button Select the washing stages.
- You will notice that the Soak light turn on.
- Select the desired cycle.
- Press the Start/Pause (Inicio/Pausa) to start the cycle.
NOTE:

In this option the duration of soaking is predetermined at 1
hour. If you want to change the duration, use the "Soaking"
button your console.

If you want to cancel this option, before starting the cycle,
Press the "Selected Washing Stages" button until the
soaking option is off and the lights are displayed in the
09-Feb-2018 07:28:55 EST | RELEASED
(Select the washing stages)
In some European factories the letter "W" of the part code mentioned herein will be automatically
following manner:
HOW TO SELECT A MANUAL CYCLE
- Turn the knob to the automatic cycle that you want to select.
- Push the Select the washing stages button.
- Select the desired cycle until the desired stages have been
selected.
You can choose any of the following manual cycles:

Soak

Wash
 Rinse – Drain / Spin

Drain / Spin
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
8