Oster GCSTCC3000 Manual De Instrucciones página 15

About Your Iron Icons/Symbols
ANTI-CALCIUM SYSTEM –A permanent system located inside the
water reservoir, designed to eliminate impurities. Refer to the ANTI-
CALCIUM SYSTEM section under MAINTAINING AND CLEANING
YOUR IRON for detailed instructions.
ANTI-DRIP SYSTEM - Eliminates leaks and water spots even.
SHOT OF STEAM FEATURE (VERTICAL) - Allows iron to function
vertically as a garment steamer. Refer to SPECIAL FEATURES
section for detailed instructions.
SHOT OF STEAM FEATURE - Provides and extra burst of steam to
help remove stubborn wrinkles.
NO STEAM – Provides the flexibility to iron without steam. Refer to
DRY IRONING section for detailed instructions.
SPRAY MIST FEATURE – Provides a powerful water spray mist that
dampens the fabric to aid in removing wrinkles from heavy fabrics and
for setting creases. Refer to SPECIAL FEATURES section for detailed
instructions.
3-WAY AUTO-OFF FEATURE – This feature automatically turns the
iron off if left in one position too long to avoid accidents.
Filling Water Reservoir (Use Tap Water)
1. Move Steam Lever to Dry
2. Place the iron with soleplate resting on a flat, clean surface.
3. Open the Water Fill Hole Cover by gripping side tabs and gently pulling out the cover
to open.
4. Use an easy-pour measuring cup to fill water reservoir with tap water through the
Water Fill Hole. Do not fill water reservoir beyond the MAX line.
5. Close the Water Fill Hole Cover securely after filling.
WARNING: To prevent the risk of burns, be careful when filling a hot iron with water. Hot
metal parts, hot water and steam can cause injuries.
setting.
English - 3