Special Features; Anti-Drip System - Oster GCSTCC3000 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ANTI-DRIP SYSTEM

Eliminates leaks and water spots.
SPRAY MIST FEATURE
A powerful water spray mist that dampens the fabric to aid in removing wrinkles from
heavy fabrics and for setting creases.
TO USE: Press the SPRAY MIST Button firmly.
SHOT OF STEAM FEATURE
Provides an extra burst of steam for deep penetration of stubborn wrinkles. You can use
this feature while Dry or Steam ironing, as long as the Fabric Select Dial is set to high
temperature. The water reservoir must be at least ¼ full of water.
TO USE: Place the iron on top of the wrinkle and press the SHOT OF STEAM button
each time you would like an extra burst of steam. The SHOT OF STEAM feature may be
used continuously in approximately 3-second intervals.
SHOT OF STEAM FEATURE (VERTICAL)
Allows iron to function vertically as a garment steamer.
TIP: When using vertical steam, hang clothing on a hanger for best results. Hanging
curtains and drapes may also be steamed.
TO USE:
1. Ensure that the iron is heated up.
2. Hold iron vertically near, but not touching the fabric you want to steam. Pull the fabric
tight.
3. Press SHOT OF STEAM button in 3-second intervals as you move iron over wrinkles.
WARNING: To prevent burns, keep hands away from the area being steamed.
WARNING: DO NOT steam garments while wearing them; this may result in injuries.
This feature automatically turns the iron off if left in one position too long to avoid
accidents.
IF YOU LEAVE IRON ON:
• Horizontally without moving it, or accidentally tip the iron over, it will automatically stop
heating after 30 seconds. The light turns red when auto-off activates and blinks.
• Vertically (on its heel rest) without moving it, the iron will automatically turn off after 15
minutes. The light turns red when auto-off activates and blinks.
IMPORTANT: When the auto-off feature has been activated, the indicator light will blink.
NOTE: The light blinks only when the iron is locked on the Heating Base.
TO RESET: Move iron back and forth and reheat until the "Ready" Indicator Light turns
solid green.

Special Features

3-Way Auto-Off Feature.
English - 6

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido