Cleaning And Storage - Dörr Ultra 48 LED Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Camera Settings
White Balance: Set your camera to auto white balance mode (AWB). If a more accurate setting is required you can do a manual
white balance metering (PRE).
Exposure: For macro and close-up shots we recommend to select the aperture manually in order to keep control of the depth
of focus. Adjust the shutter speed manually (M) or with aperture-priority mode (A).
Focus: We recommend manual focus adjustment for close-up and macro shots.
Note: In order to avoid blurred images, we recommend the use of a tripod.

CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft microfi ber cloth to clean the outer
parts of the device. Make sure to take the device o power before cleaning. Store the device in a dust-free, dry and cool place.
This device is not a toy – keep it out of reach of children. Keep away from pets.
SPECIFICATIONS
Colour temperature:
approx. 5500 K - 6500 K (daylight)
Light intensity:
approx. 130 Lux/1m with 48 LEDs, approx. 84 Lux/1m with 24 LEDs
Power source:
AC/DC adapter DC 3V 1.5A (inclusive) or alternatively:
2 Mignon AA batteries or rechargeable batteries of the same type (not included)
approx. 90 minutes with 1 set of fresh batteries, depending on type
Operation time:
Recommended distance: approx. 3 cm to 100 cm
Connection:
Supplied with adapter rings for 49, 52, 55, 58, 62, 67 mm lens mount
Measurements:
Control Unit: approx. 91 x 45 x 44 mm
LED Ring Light: approx. 134 x 103 x 28 mm
Weight:
approx. 180 g (w/o batteries)
CONTENT
1x LED ring light
1x control unit
1x AC Adapter
each 1x adapter ring 49, 52, 55, 58, 62, 67 mm
1x Instruction manual
12

Publicidad

Tabla de contenido
loading

Tabla de contenido