KIKKA BOO SUNNY Instrucciones De Uso página 5

WARNING
THANK YOU FOR CHOOSING OUR PRODUCT.
BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTION MANUAL, IT WILL TELL YOU THE CORRECT OPERATION METHOD AND THE INSTALLATION
PROCEDURE, IN ORDER TO AVOID INCORRECT OPERATION METHOD AND DAMAGE THIS PRODUCT OR DAMAGE YOUR CHILD.
For your baby's safety, you must pay attention to the following warning:
• The assembly and adjustment of the product must be carried out by the adult, please keep the child away from the active part.
• Please make sure that all the locking devices are locked.
• Safety belt must be used properly for children to ride.
• Always use the harness system.
• Placing any load on the handle will affect the stability of the stroller.
• Do not let the child in the car, a footboard stand or play.
• In order to avoid damage to the child, please take the plastic bag and other packaging materials away from the children! Danger of suffocation!
• A cotton pad with a thickness of more than 25mm should not be added on the seat.
• The maximum load carrying capacity of the car is 15kg, and it is not allowed to be overloaded.
• The maximum load bearing capacity of the store basket is 0,5kg. Do not overload.
• Applicable age range: 6-36 months. The stroller is not suitable for children under 6 months of age.
• Prohibit the use of any accessories provided by non producers.
I. PARTS
1. Handle; 2. Folding hook; 3. Harness; 4. Brake; 5. Rear wheel; 6. Foot rest pad; 7. Front wheel; 8. Canopy;
II. OPEN AND INSTALL
1. Open: loosen the folding hook, push the handle in reverse direction to open the frame, then put down the folding assembly, hear "click" .
2. Install front wheel: Insert the front foot tube into the front wheel seat, while pressing the shrapnel, when it clicks to complete the instalation.
3. Install the canopy: Press the canop hooks(B) to be placed on the handle pipe (C) (above the limit screw (A)) from the both sides. Then fix the sticky buckles
(D) in the rear of the top of the canopy to the handle.
4. Install the rear wheels: Place the rear leg tube in the hole on the rear wheel until the shrapnel clicks. When you hear a click sound, the installation is complete.
Push the shrapnel and the rear wheels will be reinstall.
III. USE
1. Harness system: Please fasten and unfasten safe belt as shown on the picture and make sure the belt is fastened when the baby is in the stroller.
2. Brake use: Step on the break pedal, the stroller is in the brake state. When the stroller does not move, it must be stepped on the brake pedal.
IV. FOLDING
1. Fold the canopy well.
2. Release the folding mechanism upwards. Fold the stroller by pushing the handle down and forward to the wheels.
3. Fold the strolley to the end and fasten with the folding hook.
V. CLEANING
Fabric parts:
1. The fabrics of the product must be cleaned with warm water and mild soap. After cleaning let the crib get completely dry before you use it. If is absolutely
forbidden to fold it and store it before it is completely dry.
2. Do not use strong cleaning agents, bleach or agents with abrasive particles, in order to clean the product. It is forbidden to clean it in a washing machine,
dryer, dry cleaning, bleach and tumble-dry it.
Plastic and metal parts:
1. The plastic and metal parts must be cleaned with a damp soft cloth and dried with dry soft cloth.
2. Do not let the product exposed to the harmful effect of external factors - direct sunlight, rain, snow or wind. This may lead to damage of the metal and plastic
parts and fading of the fabrics of the crib.
3. When you are not using the product, store it at a dry and well ventilated place, not in dusty, humid premises with very high or very low room temperatures.
Frame: The frame can be repainted if necessary. Use only non-toxic paints approved for children' s goods. From time to time check all plastic parts that are hanged
on the frame. Tighten all screw and bolts if necessary.
ENGLISH