Getting Started - Fantic INTEGRA 150 TRAIL Manual De Uso

Using power assisted pedalling
06

1. GETTING STARTED

This paragraph summarizes the most important information necessary for a correct use of the power-assisted
pedalling system.
- Make sure that the battery pack is fully charged (see paragraph "4" of this section).
When charging the battery, it may be re-
moved or left in its housing on the bicycle.
- Make sure that the connector is correctly con-
nected to the battery.
Turn the assisted pedalling system on,
-
by keeping the button "T1" pressed for
more than 2 seconds.
The display will show the starting page,
then it'll pass to the main page.
- Select the assistance level.
- The EPAC bicycle is ready for use.
- To turn off the assisted pedalling system, keep
the button "T1" pressed for more than 2 sec-
onds.
- After a certain period of inactivity (approx. one
hour), the assisted pedalling system enters
"SLEEP" mode.
- To restart the system, it is necessary to press button "T1" on the tool twice (at intervals of one second).
EN_22
2 sec.
T1
1
sec.
Ed. 1 - 07/2019