Other Operations; Winter Storage - Fantic INTEGRA 150 TRAIL Manual De Uso

If it is necessary to replace the tyre:
- remove it completely from the wheel rim.
- fit the new tyre, inserting one side onto the
wheel rim.
Make sure that the direction arrow on the tyre
corresponds to the direction of rotation.
If it is not necessary to replace the tyre:
- Inflate the new inner tube slightly so that it be-
gins to take shape.
- Insert the valve through the corresponding
hole on the wheel rim.
The valve must be aligned so that it is point-
ing towards the centre of the wheel (see para-
graph "3.c" . Section "03").
- Push the remaining wall of the tyre onto the
wheel rim, starting at the point where the valve
is located.
- Push the opposing sides of the tyre onto the
rim simultaneously, working your way right
around the perimeter and starting from the
valve.
The further away from the valve you get, the
greater the force required to push the tyre
onto the rim. For this reason, it may be nec-
essary to use the tyre levers, while taking care
not to damage the inner tube.
- Inflate the inner tube a little more.
- Move the tyre backwards and forwards, trans-
versally with respect to the direction of rota-
tion.
Make sure that the tyre is positioned centrally
on the wheel rim and that the inner tube does
not protrude at any point.
- Inflate the inner tube to the recommended
pressure (see value indicated on the tyre).
- Replace the wheel unit (see the preceding par-
agraphs in the section).
- Check the tyres.
Ed. 1 - 07/2019
Cleaning and Maintenance

7. OTHER OPERATIONS

- For any maintenance operations not described
in this section, contact your vendor.

8. WINTER STORAGE

When the bicycle is not used for prolonged periods:
- Disconnect the battery and recharge it; re-
charge it at least once every 4 months.
- Check the tyre pressure (1 bar) and inflate
them at least once every 4 months.
07
EN_35