Tool Specifications; Machine Elements - Berner BBS-75 Instrucciones De Servicio

2 609 932 499.book Seite 2 Samstag, 19. November 2005 10:54 10
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. Such preventive safety meas-
ures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfa-
miliar with the power tool or these instruc-
tions to operate the power tool. Power
tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Prop-
erly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are eas-
ier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazard-
ous situation.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer. A charger that is suit-
able for one type of battery pack may create
a risk of fire when used with another battery
pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a con-
nection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts. This will ensure that the
safety of the power tool is maintained.

Tool Specifications

Belt sander
Order number
Rated input power
Output power
No-load belt speed [m/min] 200 – 330
Length of sander
belt
Width of sander
belt
Belt speed
preselection
Connection for self/
external dust
collection
Weight according
to EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/
240 V. For lower voltages and models for specific coun-
tries, these values can vary.

Machine Elements

The numbering of the machine elements refers to
the illustration of the machine on the graphics
page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 Auxiliary handle
2 Clamping lever
3 Belt speed thumbwheel
4 On/Off switch
5 Lock-on button for On/Off switch
6 Dust bag
7 Adjustment knob for belt position
8 Thread
9 Outlet piece
10 Protective cap
11 Dust passage
12 Guide plate*
13 Graphite plate*
* Not all of the accessories illustrated or described are
included as standard delivery.
English - 2
BBS-75
031106
[W] 750
[W] 410
[mm] 533
[mm] 75
[kg] 3.4
/ II