Nedo TUBUS 1 Manual De Instrucciones página 14

Structure
TUBUS 1 control panel
1
Press the OK button to enter tilt percentages.
Press the OK button again to finish the input
2 Swing the laser beam to the LEFT or directly
select a number when entering the tilt.
3 Adjust the tilt or direct input of the selected
4 Swing the laser beam to the RIGHT or directly
select a number when entering the tilt.
5
Switches the unit on and off.
IR receiver panel
Receiver panel for the infrared remote control
6
(there is another receiver panel at the front of
LCD display
7
TUBUS 1 LCD display
Tilt indicator (%)
Displays the entered tilt in %. Rising gradients
1
(+) are displayed in green, falling gradients (-)
are displayed in red
Laser symbol
2 Flashing: Laser is being aligned
Continuously on: Laser is aligned.
Battery symbol
3 Indicates the state of charge of the
battery/rechargeable battery.
4 The spirit level symbol indicates the unit's
current transverse tilt.
Padlock symbol
5 Indicates whether the controls on the unit are
open or locked.
Transverse adjustment (azimuth)
6 Indicates the current position of the laser beam
in relation to the unit's longitudinal axis
TUBUS 1 Pipe Laser Operating Instructions
OK
button
Left arrow
+ / -
number
Right arrow
ON/OFF
the unit)
Tilt level
EN
14