LaserLiner CrossDot-Laser 5P Manual De Instrucciones página 11

Danger – powerful magnetic fields
Powerful magnetic fields can adversely affect persons with active medical implants (e.g. pacemaker)
as well as electromechanical devices (e.g. magnetic cards, mechanical clocks, precision mechanics,
hard disks).
With regard to the effect of powerful magnetic fields on persons, the applicable national stipulations
and regulations must be complied with such as BGV B11 §14 „electromagnetic fields" (occupational
health and safety - electromagnetic fields) in the Federal Republic of Germany.
To avoid interference/disruption, always keep the implant or device a safe distance of at least 20 cm
away from the magnet.
Horizontal and vertical levelling
3
Release the transport restraint, slide the slide switch (2) to the right. The laser cross and laser points
appear. The laser lines and the laser points can be switched individually with the selection button (4).
LASER LASER
The transport restraint must be released for horizontal and vertical levelling. The laser lines flash
!
as soon as the device is outside the automatic levelling range of 4°. Position the device such that
it is within the levelling range. The light of the laser lines is constant again.
Slope mode
4
Do not release the transport restraint, push the slide switch (2) to the left. To switch on slope mode,
press and hold selector button (4) for 3 seconds. The slope mode LED (3) lights up. Then select the laser
with the selector button. Sloping planes and tilts can now be measured. In this mode, the laser lines no
longer align automatically. This is signalised by the laser lines flashing.
LASER LASER
LASER LASER
LASER LASER
CrossDot-Laser 5P
LASER LASER
LASER LASER
11
EN