Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain.This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Function / Application
Automatic cross-line and 5-point laser for vertical and horizontal alignment
– The slope-mode feature is an extra that permits gradients to be laid out.
– Individually switchable laser lines
– The 5 laser points are arranged each offset by 90° on the horizontal and vertical planes of the laser lines.
3 points of intersection, consisting of a laser line and point, are formed at the end of the laser lines.
– The plum and ceiling points allow markings to be easily transferred from the floor to the ceiling.
– Out-Of-Level: is indicated by optical signals when the unit is outside its self-levelling range.
– With the 360° magnetic base the device can be used individually or in combination –
on walls and attached to magnetic objects
– Automatic levelling range 4°, Accuracy 0,2 mm / m
General safety instructions
– The device must only be used in accordance with its intendedpurpose and within the scope
of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
Safety instructions
Using class 2 lasers
Do not stare into the beam!
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes and
immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)
be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40...1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices are in operation.
– In public areas shield off the laser beam with barriers and partitions wherever possible
and identify the laser area with warning signs.
08
EN
Laser radiation!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014