Amprobe 37XR-A Manual De Uso página 2

37XR-A Users
Change #1
On page 19, Figure 10, step 3 the red lead should
be connected to the E H mA socket.
Change #2
On page 11, under General Specification, change
Operating environment:
From: 0 ºC to 50 ºC at <70% R.H.
To: 0 ºC to 50 ºC at <70% R.H. for all functions
except 10A ranges
10A ranges: 0 ºC to 40 ºC at <70% R.H.
Change #3
On page 13, under DUTY CYCLE replace the
Frequency Range with the following:
Change #4
A
dd the following drawing to the front of the
manual:
10/06
0% to 10% (40 Hz to 990 Hz)
10% to 90% (40 Hz to 20 kHz)
Supplement
1