Adjusting The Presser Foot Pressure; Adjusting The Thread Tension - JUKI MF-7200D Manual De Instrucciones

6. Adjusting the presser foot pressure
Decrease the presser foot pressure as low as possble
to such an extent that sttches are stablzed.
To adjust the pressure, loosen lock nut 2 of presser
1
sprng regulator 1 and turn presser sprng regulator 1 .
After the adjustment, tghten lock nut 2 .
2
Turnng t clockwse to ncrease the pressure.
Turnng t counterclockwse to decrease the pressure.
7. Adjusting the thread tension
Adjust the thread tenson wth the followng thread ten-
son nuts.
1 Needle thread tenson nut
1
2 Top coverng thread tenson nut
3 Looper thread tenson nut
Turn clockwse to ncrease the thread tenson.
Turn counterclockwse to decrease the thread tenson.
B
A
2
3
B = Decrease
A = Increase
– 13 –