Opening The Case; Closing The Lid - KTM Power Parts TOP-CASE 46 Instrucciones De Montaje

OPENING THE CASE

Lift the handle. Then lift the central tab as shown in the diagram. Once
you have done this, the ejector will lift the lid of the case just enough to
release it from the interior catches. Finally, take hold of the
overhanging part of the case lid and lift the lid with your hand, as
shown in the diagram.

CLOSING THE LID

To close the lid, let it drop down and then press it down with both
hands, as shown in the diagram, until you hear the catches click into
place. Make sure it is properly closed by pulling up the overhanging
part of the lid to see whether it will open.
4