Video Setup - Velleman CAMCOLVC21 Manual Del Usuario

Light Frequency
When using the camera indoors, the Light Freq. setting can help
reduce flicker caused by artificial lighting. Select the frequency of
your local mains supply (50 or 60 Hz).
TV Out
Use the TV Out function to select the correct output format (PAL or
NTSC) for use with the TV-OUT connector [4].
Formatting
Use the Format function to format the SD card. Choose Yes to
format the card; choose No to exit without formatting.
Caution: formatting erases all the data on the card, including the
emergency videos. Create a back-up copy on your pc first.
System
Use the System function for resetting and for viewing system
information.
 Factory Reset: to reset the camera to the factory defaults.
Choose Yes to reset, choose No to exit without resetting.
 System Info: displays the version number of the camera
software.
 Card Info: displays SD card information; name, size in GB, and
free space in GB and %.
Delay Shutdown
If the camera is connected to the power adapter, it switches off when
the power supply on the adapter is switched off. However, if you
want the camera to keep recording after the power supply is off, set
Delay shutdown to On.
7. Video
7.1

Video Setup

To specify settings for video recording, proceed as follows:
1. In video mode (not recording), press MENU.
2. Make sure that video settings
confirm.
All settings are described in detail below.
Movie Size
Use the Movie Size function to select the size of the video.
V. 02 – 05/05/2014
CAMCOLVC21
are selected and press REC to
8 ©Velleman nv